Advertisement

 
 
 
SKYZONE
SKY03O
FPV GOGGLE
USER MANUAL
Rev1.0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SKY03O and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for SkyZone SKY03O

  • Page 1                     SKYZONE SKY03O FPV GOGGLE USER MANUAL Rev1.0...
  • Page 2: System Content

    System Content                 GOGGLE                                                          Carry case   ...
  • Page 3: Function Diagram

    Function Diagram             2   ...
  • Page 4: Operational Guidance

    Operational Guidance The two 5.8GHz wireless receiver modules and the new DVR system are built in the SKY03O FPV goggles. The wireless receiver system can work in the diversity mode to improve the receiving effect. In this mode, the channel and band settings for wireless receiver can be compatible with most of the conventional ISM 5.8GHz transmitters,...
  • Page 5: Voltage Calibration

    · When exiting the search menu, the receiver will work on the channel where the triangle indicator is located. RF Racing · The <RF Racing> mode is specially set for the racing. In this mode, the goggels can work only on the eight channels of the Race band.
  • Page 6: Front Camera

    HDMI IN modes. · The MODE Button is set as the exit button in the MENU status. · The MODE Button is set as the right selection button in the channel search status. CAMERA Button: · In any mode, short press the CAMERA button to switch to the forward-looking mode. ·...
  • Page 7: Led Light

    <Tilt> represents the reverse of the channel; and <Pan & Tilt> is reversed in both directions. LED Light · SKY03O has a display window for the LED light. The LED MODE can be set in the system menu. A variety of lighting effects can be selected.
  • Page 8: Hdmi Input

    · The built-in fan can not only be mainly used for defogging, but also can be used to dissipate the heat within the product. The speed of fan can be set in the system menu. · 16-Level User Adjustable speed. ·...
  • Page 9: Format Sd Card

    OLED Screensaver · The image will move 10 pixel/minute, flow the order: middle→right→middle→left→middle, circulating. · This function can't turn off. Format SD-CARD · Enter into the system menu to select the Format SD card option; press the <OK> button to enter into the setting state;...
  • Page 10: Specifications

    Specifications 35 degrees (Diagonal) Resolution 1024X768(XGA), OLED Adjustable, 300cd/㎡ (Max) Binocular Luminance Display Contrast ratio 10000:1 Interpupillary 57.5 to 69.5mm Adjustable distance (IPD) ISM 5.8GHz 48 Channel, Diversity receiver. Band CH 1 5865M 5845M 5825M 5805M 5785M 5765M 5745M 5725M 5733M 5752M 5771M...

Table of Contents