Suggested Tool Requirements - LG LW1812HR Owner's Manual

Suggested Tool Requirements

SCREWDRIVER(+, -), RULER, KNIFE, HAMMER, PENCIL, LEVEL
PREPARATION OF CHASSIS
1. Remove the screws which fasten the cabinet at
both sides and at the back.
2. Slide the unit out from the cabinet by gripping
the base pan handle and pulling forward while
bracing the cabinet.
3. Cut the window sash seal to the proper length.
Peel off the backing and attach the Foam-PE to
the underside of the window sash.
4. Insert the Frame guides into the bottom of the
cabinet.
Insert the Frame Curtain into the Top retainer bar
5.
and Frame guides.
Fasten the curtains to the unit with 10 screws
6.
(Type A) at both sides.
Foam-PE
Top retainer bar
Screw
(Type A)
Frame guide
Installation
Shipping screws
Fig. 1
Fig. 2
Fig. 3
Screw(Type A)
Fig. 4
Owner's Manual 13