Philips Sonicare DiamondClean HX9316/08 Manual page 11

35_021_1519_1_Booklet_Lux_A6_v1.indd 11
2 Apply a small amount of toothpaste on the
bristles.
3 Place the toothbrush bristles against the teeth
at a slight angle (45 degrees), pressing firmly to
make the bristles reach the gumline or slightly
beneath the gumline.
Note: Keep the center of the brush in contact
with the teeth at all times.
4 Press the power on/off and mode button to
turn on your Philips Sonicare.
5 Gently keep the bristles placed on the teeth
and in the gumline. Brush your teeth with small
back and forth motion so the bristles reach
between the teeth.
Note: The bristles should slightly flare.
Do not scrub.
6 To clean the inside surfaces of the front teeth,
tilt the brush handle semi-upright and make
several vertical overlapping brushing strokes
on each tooth.
English
11
03/05/16 16:02