Table of Contents
Advertisement
HT904SA-A2P_BARELL_ENG_0727
Setting up
The speakers are detached from the speaker stands.
a
a
Assembling the Speakers (HT914TA, HT914PA)
1 Attach the speakers to the speaker stands by rotating the screw.
2 If you want to arrange the speaker cable, draw the speaker cable
through the hole on the speaker.
3 Connect the speaker cable.
Attaching the speakers to the DVD receiver
a
a
You will have received six speaker cables.
Each one is colour-coded by a band near each end and connects one of
the six speakers to the DVD receiver.
4
10/7/09
3:06 PM
Page 4
b
b
c
c
b
b
Connect the wires to the DVD receiver.
Match each wire's coloured band to the same coloured connection
terminal on the rear of the DVD receiver. To connect the cable to the DVD
receiver, press each plastic finger pad to open the connection terminal.
Insert the wire and release the finger pad.
Connect the black end of each wire to the
terminals marked -(minus) and the other end
to the terminals marked + (plus).
c
c
Connect the wires to the speakers.
Connect the other end of each wire to the correct speaker according to
:
the colour coding
Main Unit
SPEAKER
REAR R
Grey
Behind you and to your right.
FRONT R
Red
In front of you, to the right of the screen.
Above screen, directly in front of you.
CENTER
Green
SUB WOOFER
This can be placed in any front position.
Orange
Behind you and to your left.
REAR L
Blue
In front of you, to the left of the screen.
FRONT L
White
To connect the cable to the speakers, press each plastic finger pad to open the
connection terminals on the base of each speaker. Insert the wire and release
the finger pad.
Be careful of the following
Be careful to make sure children do not put their hands or any objects into the
*speaker duct.
*Speaker duct: A hall for plentiful bass sound on speaker cabinet(enclosure).
Use the rear speaker at least 30 CM away from either TV screen or PC
monitor.
POSITION
Advertisement
Table of Contents
