Advertisement
Unify Your Wi-Fi Networks via WPS
Copy SSID and password from your router via WPS to create one unified Wi-Fi network throughout your home.
Note: If your router doesn't have a WPS button, manually change the extender's Wi-Fi settings via the tpPLC app, tpPLC Utility, or web interface.
1
Plug in the extender in the same room as your router. Wait
until the extender's Wi-Fi LED
turns on.
2
Press your router's WPS button. Within 2 minutes, press the
extender's Wi-Fi button for 1 second. The extender's Wi-Fi
LED
starts blinking. When it stays on, Wi-Fi settings are
copied.
Note: If Wi-Fi settings are not copied within 2 minutes, manually change the
extender's Wi-Fi settings.
3
Relocate the extender and enjoy the internet using your
router's SSID and password.
Create a Secure Powerline Network by Pairing
Note: You can only pair two devices at a time. We recommend that you plug in the powerline devices near each other when pairing.
1
Press the Pair button on the adapter for 1 second. Its Power
LED
should start blinking.
Note: If the Power LED does not blink, press the Pair button again.
2
(Within 2 minutes) press the extender's Pair button for 1
second. Its Power LED
should start blinking.
3
When the extender's Powerline LED
turns on, a powerline
network has been successfully created.
Sync Wi-Fi Settings to More Extenders
If you have more extenders, simply plug in and pair each one with the existing adapter to join the network. Then the Wi-Fi settings will automatically sync
from the existing extender to the new ones.
Personalize Your Network
tpPLC App
For easy management via your smartphone or tablet, download the app from the
App Store or Google Play, or simply scan the QR code.
Scan to download
tpPLC App
tpPLC Utility
For easy management via your computer, download the utility on the product's
Support page at https://www.tp-link.com.
Note: For detailed instructions, refer to the utility manual on the product's Support page.
Web Interface
To access all settings, connect to an extender wirelessly and visit
http://tplinkplc.net.
Note: For detailed instructions, refer to the product manual on the product's Support page.
WPS
Within 2 minutes
WPS/
Wireless Router
Extender
Blinking
Within 2 minutes
Adapter
Extender
TL-PA4020P
TL-WPA4220
Frequently Asked Questions
Q1. How do I reset my adapter and extender to factory default settings?
A1. For TL-PA4020P, press and hold the Pair button until all LEDs turn off and then come back on.
A2. For TL-WPA4220, press and hold the Reset button for at least 2 seconds. Release the button and all LEDs
turn off.
When the LEDs turn back on, the reset process is complete.
Q2. What should I do if the Powerline LED
is off?
A1. Try another wall socket and make sure all powerline devices are on the same electrical circuit.
A2. Try to set up a powerline network by pairing. Refer to the section above for instructions.
A3. If the problem persists, contact our Technical Support.
Q3. What should I do if there is no internet connection in my powerline network?
A1. Make sure all powerline adapters and extenders are on the same electrical circuit.
A2. Make sure the Powerline LEDs
are lit on all of your powerline devices. If they are not, pair all devices
again.
A3. Make sure all devices are correctly and securely connected.
A4. Check if you have an internet connection by connecting the computer directly to the modem or router.
Q4. What should I do if a successfully-paired extender does not reconnect after it is
relocated?
A1. Make sure all powerline adapters and extenders are on the same electrical circuit.
A2. Try to pair the extender again, and make sure the Powerline LED
A3. Check for possible interference due to a washing machine, air conditioner or other household appliances
that may be too close to one of the powerline devices. Plug the appliance into the integrated electrical
socket to remove the electrical noise if your powerline device has an integrated electrical socket.
Physical Appearance
Blinking
Pair Button
Pair
On
Reset
Reset
LED
STATUS
On
Power
Blinking
Off
On
Powerline
Off
Ethernet
On/Off
On
Blinking
Wi-Fi
Blinking
On
Off
* If the device connected to
automatically switch to Power-Saving Mode.
ITEM
DESCRIPTION
Pair Button
Press and hold for 1 second to set up or join a secure powerline network.
Press for 1 second to start copying Wi-Fi settings from the router.
Wi-Fi Button
Press and hold for about 5 seconds to turn Wi-Fi on or off.
Reset Button
Press and hold until all LEDs turn off to reset the adapter/extender to factory default settings.
For technical support, replacement services, user guides, and other information,
please visit https://www.tp-link.com/support, or simply scan the QR code.
To communicate with TP-Link users or engineers, please join the TP-Link
Community at https://community.tp-link.com.
If you have any suggestions or needs for our product guides, you are welcome to
email techwriter@tp-link.com.cn.
TP-Link hereby declares that the device is in compliance with the essential requirements and
other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and
(EU)2015/863. T he original EU declaration of conformity may be found at
https://www.tp-link.com/ce.
Safety Information
· Keep the device away from water, fire, humidity or hot environments.
· Do not attempt to disassemble, repair, or modify the device.
· Do not use the device where wireless devices are not allowed.
· Do not use damaged charger or USB cable to charge the device.
· The socket-outlet shall be installed near the equipment and shall be easily accessible.
· For passthrough devices, plug the power strips into the integrated electrical sockets of the
devices, but devices of the same or another type not be stacked in normal use.
is on.
· Plug the powerline devices directly into the wall outlets but not the power strips.
Please read and follow the above safety information when operating the device. We cannot
guarantee that no accidents or damage will occur due to improper use of the device. Please use
this product with care and operate at your own risk.
Power LED
Powerline LED
Ethernet LED
Wi-Fi LED
Wi-Fi Button
DESCRIPTION
The powerline adapter/extender is on.
Quickly: Pairing is in process.
Slowly: Power-Saving Mode is on.* (TL-PA4020P Only)
The powerline adapter/extender is off.
The powerline adapter/extender is connected to a powerline network.
The powerline adapter/extender is not connected to any powerline network.
The Ethernet port is connected or not connected.
The wireless function is enabled.
Slowly: The powerline extender is cloning 2.4G Hz wireless network
settings from the main router.
Quickly: The powerline extender is syncing 2.4G Hz wireless network
settings.
The wireless function is disabled.
TL-PA4020P
is turned off or inactive for more than 5 minutes,
TL-PA4020P
Power Socket
Power LED
Powerline LED
Ethernet LED
Pair Button
will
Advertisement
