# 1
Pull the cabinet upwards,
Then push the button "push" to separate
the hinge body and stand body.
# 3
Disassemble the back cover.
# 5
Separate the lamp shield from rear shield.
Please pull off the latch first.
# 7
Copyright
2007 LG Electronics. Inc. All right reserved.
Only for training and service purposes
DISASSEMBLY
# 2
Pull the cabinet upwards,
Then separate all latches on each side.
# 4
Remove the control button from cabinet,
Then disassemble the connector.
# 6
Turn around the base lock to open the
lock between base cover and stand body..
Then separate stand body and base cover.
- 8 -
LGE Internal Use Only