Remote Control
You can choose to enable or disable the Remote
Control function. And you can set the Server address.
You can click "Skip" to skip this setting.
PS: If no data entered, you can't click "Next" to go to
next page.
5.1.5 Clone Media Files into internal
(1) Clone media files from SD
After cloning, it will jump to
(2) Clone media files from USB
After cloning, it will jump to
5.1.6 Setup Complete
When you click "Finish", it will start "Import" or "Clone
Data".
If it runs "Import", it will show
Otherwise it will show
6.2 Manual Setup Complete
PS: Do not power off during "Import" and "Clone"
processes, otherwise it will cause data loss.
(1) Import Clone Data
Click "Finish", run "Import data", it will re-boot
automatically.
6.1 Import Clone Data .
6.1 Import Clone Data
.
6.1 Import Clone Data
.
(2) Manual Setup Complete
After finishing manual setup, you can enter Admin
Mode to change settings in the future if necessary.
5.2 Android Launcher
5.2.1. Platform launcher
Platform launcher is black page as below:
By pressing back key you can exit the app, the screen
.
will go to platform launcher.
5.2.2. Admin mode:
You can press "Menu + V-" to enter Admin mode.
Admin mode will show 4 icons: "Settings", "Apps",
"Network" and "Help".
When you exit from Admin mode, the system will go
back to boot on source.
11