Dehumidification Mode - LG ATNQ48GMLE2 Owner's Manual

Dehumidification Mode
1
Press the ON/OFF button.
The unit will respond with beep sound.
2
Press MODE button to select Dehumidifi-
cation Mode.
3
Set the fan speed. You can select the fan
speed in four steps - low, medium, high, or
chaos. Each time the button is pressed,
the fan speed mode is shifted.
OWNER'S INSTRUCTION
During Dehumidification Mode
• If you select the dehumidification mode
on the operation selection button, the
indoor unit starts to run the dehumidifi-
cation function, automatically setting
the room temp. and air volume to the
best condition for dehumidification
based on the sensed room temp.
In this case, the setting temp. is not
displayed in the Remote Controller and
you are not able to control the room
temp. either.
• During the healthy dehumidification
function, the air volume is automatically
set according to the algorithm respond-
ing to the current room temp. and
makes the room condition healthy and
comfortable even in the high humidity
season.
17