Side Camera Operation
Displaying the Side Camera image from the
Menu screen
1
Press the MENU button.
The menu screen is displayed.
• You can also display the menu screen by touching [
lower part of the Audio source screen or by swiping upward.
2
Touch [Camera].
The Side Camera view is displayed.
• Touch the screen while the camera image is being displayed, and touch
[
] or [ ] to return to the main source screen or previous screen.
• You can perform a Guide Adjustment. For details, see "Adjusting the
Rear/Front/Side Camera Guide" (page 45).
• If you connect a Side Camera using the optional Multi Camera
Interface module, you can display the Side camera image using the
[Camera] button only when you set "Setting a Default Camera"
(page 46) to "Side". If you connect a Rear Camera and Front Camera at
the same time, touch [Rear] or [Front] in the Rear Camera image to
switch the Camera image.
[Camera] button
] on the
Switching the Image Pattern for the Side
Camera
If the camera has a view switch function, the Direct Change switch is
displayed.
1
Touch the screen when the image from the side camera
is displayed.
The operation screen is displayed on the screen.
• After a 5-second time-out, the operation screen returns to the
camera display screen.
2
Touch [Rear] or [Front].
The image pattern changes.
Rear:
Vehicle Rear view
Front:
Vehicle Front view
• For detailed information about image patterns, see the camera Owner's
Manual.
• You can perform a Guide Adjustment. For details, see "Adjusting the
Rear/Front/Side Camera Guide" (page 45).
85
-EN