In/Out Cable Connection - LG PC500-A Series Owner's Manual

In/Out Cable Connection

To view images on the monitor that is not connected to the monitor docking port of PC500-F***, you need to
connect the PC500-F*** to the monitor via a DP cable.
Attention
● HDMI kit, HDMI, DP, LINE-OUT, and LAN cables are not included in the basic components. You need to
purchase a cable separately as it is not provided as an accessory.
● After cabling is complete, assign the SET ID of the monitor to be connected to PC500-F***.
● To configure the SET ID, please refer to the owner's manual for your monitor.
Note
When using the SuperSign Manager software:
● The monitor's SET ID is a unique number used to identify the monitor. You can choose a number from 1
to 25. The SET ID allows the SuperSign Manager software to identify the monitor.
● In order to directly connect the monitor to the PC500-F***, its SET ID must be set to 1.
● To use SuperSign Manager, the monitor that will be connected to a PC500-F*** must support the LG
RS232C protocol. A monitor supporting the LG RS232C protocol can be controlled the monitor functions,
such as brightness and sound, using SuperSign Manager.
29