Table of Contents
Advertisement
EDITING A LABEL
Deleting all text at once
Use the Clear key to delete all text at once.
1
Press the Clear key.
The Clear options are displayed.
2
Using the
format settings, or select "Text&Format" to delete all text and format settings.
• Press the Esc key to return to the text entry screen, without erasing (or clearing) text or
• When "Text&Format" is selected, all text is cleared and the P-touch labeling system set to
3
Press the OK or Enter key.
All text is deleted. All format settings are also deleted if
"Text&Format" was selected.
In addition to the symbols available on the keyboard, there are various symbols (including
international, extended ASCII characters and the user-defined characters
the symbol function.
To enter a symbol, use the Symbol function (see below).
Alternatively, press the Shift key and then press a key on the keyboard to enter the symbol
printed on the selected key's upper-right corner.
Selectable "Symbols" (excluding the user-defined characters) are listed in the Appendix.
(See page 58)
To use the user-defined characters, transfer the bitmap image to the P-touch labeling system
using the P-touch Transfer Manager.
*1
A bitmap image of a user-created character that is not pre-installed on the P-touch labeling system.
Entering Symbols Using the Symbol Function
1
Press the Symbol key.
A list of symbol categories and symbols in that category is displayed.
The last symbol entered is selected in the displayed list.
2
Select a symbol category (Punctuation, Mathematics, etc.) using the
then press the OK or Enter key.
4
Entering Symbols
1.888.610.7664
or
key, select "Text Only" to delete all text while retaining the current
format.
the default settings.
www.calcert.com
15
10
20
5
25
0
30
Entering Symbols
*1
) available with
or
key and
sales@calcert.com
Advertisement
Table of Contents
