Advertisement
Operating Instructions
Operating Instructions
How to insert the Batteries
1. Remove the battery cover by pulling it according to the arrow
direction.
2. Insert new batteries making sure that the (+) and (-) of battery are
installed correctly.
3. Reattach the cover by sliding it back into position.
NOTICE
Use 2 AAA(1.5volt) batteries.
Do not use rechargeable batteries.
Storage and Tips for using the Remote controller
• The remote controller may be stored by mounting
it on a wall.
Signal Receptor
Receives the signals from the remote control.(Signal receiving sound: two short beeps or one long beep.)
Operation Indication Lamps
On/Off
Sleep Mode
Timer
Defrost Mode
OUT
OUTDOOR UNIT
DOOR
OPERATION
Energy-Saving
Plasma
12 Room Air Conditioner
: Lights up during the system operation.
: Lights up during Sleep Mode Auto operation.
: Lights up during Timer operation.
: Lights up during Defrost Mode or Hot
Start operation (Heat pump model only)
: Lights up during outdoor unit operation.
(Cooling model only)
: Light up during Energy-Saving cooling mode operation. (optional)
: The function illustrates its dynamic mode by using a multiple lighting system.
• To operate the room air conditioner, aim the
remote controller at the signal receptor.
Operation indicating
lamps
Advertisement
