Operating Instructions; Cooling Mode; Auto Cleaning Button; Airflow Setting - LG ZPNQ48GTLA0 Owner's Manual

OPERATING INSTRUCTIONS

12
OPERATING INSTRUCTIONS

Cooling Mode

|
1
Press button to turn on the indoor.
a
2
Press button to select Cooling opera-
tion mode.
- When canceling operating, press
ton once more.
3
Adjust the desired temperature by press-
ing ( ) buttons.
- If desired temperature is higher than
room temperature, cooling cannot be con-
ducted.
- Set the temperature lower than the room
temperature
- Setting Temp Range : 18 °C~30 °C.
NOTE
!
What is 3 minutes delay function?
The reason that cold wind is not coming out
when operating the unit after turning off the
cooling is because of the function to protect
compressor. Cold wind will be coming out
when compressor is operated after 3 minutes.

Auto cleaning button

In the cooling and dehumidifying operations,
moisture is generated inside the indoor unit.
Use the auto cleaning function to remove
such moisture
|
1
Press button to turn on the indoor.
2
Press button.
is displayed on the display screen.
-
- If you turn off the power, the fan
operates for 3 minutes and cleans the inside
of the indoor unit.
NOTE
!
Some buttons cannot be used while the
auto cleaning function is in operation.
Airflow Setting
We can simply adjust the desired airflow di-
rection.
Up/Down Airflow Direction Control
|
but-
1
Press
2
Press
up and down.
I
3
Press
louver at the desired airflow direction.
Left/Right Airflow Direction Control
1
Press
Press J button and the louvers will
2
swing left and right.
Press J button again to set the vertical
3
louver at the desired airflow direction.
<Airflow Setting Table>
Symbol
I
J

Fan Speed Mode

1
Press
2
Press
- You can select the fan speed in four
steps low, mid, high, super high. Each
time the button is pressed, the fan speed
mode is shifted
- Air flow rate can be selected during the
cooling, dehumidification, blowing, and
auto operation mode.
|
button to turn on the indoor.
I
button and the louvers will swing
button again to set the horizontal
|
button to turn on the indoor.
Description
Up·Down : Vane move from up to
down automatically and continu-
ously
Left·Right : Vane move from left to
right automatically and continuously
|
button to turn on the indoor.
button to select fan speed.