Table of Contents
Advertisement
Setting up the TV
Image shown may differ from your TV.
Attaching the stand
1
Stand Body
Stand Base
2
3
M4 x 14
4EA
Only
32/42/47/55LN549C,
32/42/47/55LN549E,
LP36**, LP62**
3EA
M4 x 14
Only
60LN54**,42LN549D
3EA
M5 x 25
ASSEMBLING AND PREPARING
CAUTION
When attaching the stand to the TV set, place the
y
screen facing down on a cushioned table or flat
surface to protect the screen from scratches.
Make sure that the screws are inserted correctly
y
and fastened securely. (If they are not fastened
securely enough, the TV may tilt forward after
being installed.)
Do not use too much force and over tighten the
screws; otherwise screw may be damaged and
not tighten correctly.
NOTE
Remove the stand before installing the TV on a
y
wall mount by performing the stand attachment in
reverse.
Mounting on a table
1
Lift and tilt the TV into its upright position on a table.
- Leave a 10 cm (minimum) space from the wall
for proper ventilation.
10 cm
2
Connect the power cord to a wall outlet.
CAUTION
Do not place the TV near or on sources of heat,
y
as this may result in fire or other damage.
9
Advertisement
Table of Contents
