Advertisement
Operating Instructions
Wireless Remote Controller
The controls will look like the following.
PLASMA
SLEEP
Operation Mode
Cooling Operation
Auto Operation or Auto Changeover
Healthy Dehumidification Operation
Air Circulation
Room Air Conditioner
10
Signal transmitter
START/STOP BUTTON
Used to turn off/on the unit.
OPERATION MODE SELECTION BUTTON
Used to select the operation mode.
ROOM TEMPERATURE SETTING BUTTONS
Used to select the room temperature.
INDOOR FAN SPEED SELECTOR BUTTON
Used to select fan speed in four steps
low, medium, high and CHAOS.
VERTICAL AIRFLOW DIRECTION CONTROL
Used to set the desired vertical airflow direction.
HORIZONTAL AIRFLOW DIRECTION CONTROL
Used to set the desired horizontal airflow direction.
AUTO CLEAN BUTTON
Used together on/off operating
ENERGY-SAVING COOLING MODE BUTTON
Used to set energy-saving cooling mode operation.
ROOM TEMPERATURE CHECKING BUTTON
Used to check the room temperature.
ON/OFF BUTTON
Used to set the time of starting /Stoping operation.
TIME SETTING BUTTONS
Used to adjust the time.
TIMER SET/CLEAR BUTTON
Used to set and clear timer operation.
RESET BUTTON
Used to before new setting or after
changed baterry.
PLASMA
PLASMA BUTTON
Used to start or stop plasma operation.
LED LUMINOSITY BUTTON(Optional)
Used to adjust LED luminosity.
SLEEP MODE AUTO BUTTON
Used to set sleep mode auto operation.
JET COOL BUTTON
Used to start or stop the speed cooling.
(It operates fan in super high speed in
cooling mode)
Advertisement
