Installation - LG GR-V262RL Owner's Manual

• Information of fluorinated greenhouse gases
used as refrigerant of this refrigerator.

INSTALLATION

SELECT A GOOD LOCATION
1. Place your refrigerator where it is easy to use.
2. Avoid placing the refrigerator near heat
sources, direct sunlight or moisture.
3. To ensure proper air circulation around the
fridge-freezer, please maintain sufficient space
on both the sides as well as top and maintain
at least 2 inches (5 cm) from the rear wall.
4. To avoid vibrations, the refrigerator must be
level. If necessary, adjust the leveling screw(s)
to compensate for unevenness of the floor.
To close the doors easily, the front should be
slightly higher than the rear. Leveling screw(s)
can be turned easily by tipping the cabinet
slightly. Turn the leveling screw(s) clockwise to
raise the refrigerator, counterclockwise to
lower it.
DISPOSAL OF YOUR OLD APPLIANCE
1. When this crossed-out wheeled bin symbol is attached to a product
it means the product is covered by the European Directive
2002/96/EC.
2. All electrical and electronic products should be disposed of separately
from the municipal waste stream via designated collection facilities
appointed by the government or the local authorities.
3. The correct disposal of your old appliance will help prevent potential
negative consequences for the environment and human health.
4. For more detailed information about disposal of your old appliance,
please contact your city office, waste disposal service or the shop
where you purchased the product.
4
NEXT
1. Wipe off all dust accumulated during shipping
and clean your refrigerator thoroughly.
2. Install accessories such as the ice cube box,
evaporating tray cover, etc., in their proper
places. They are packed together to prevent
possible damage during shipping.
3. Connect the power supply cord (or plug) to the
outlet. Don't double up with other appliances
on the same outlet.
4. Prior to use, let the refrigerator run for 2-3
hours. Check the flow of cold air in the freezer
compartment to ensure proper cooling has
taken place.Your refrigerator is now ready for
use.