LG M4214T Owner's Manual page 8

Connecting to External Devices
Connect the power cord.
1
Turn on power by pressing the power button on the product.
2
Turn on the PC.
Select an input signal.
Press the INPUT button on the remote control to select the input signal.
▼▲
INPUT
Or, press the SOURCE button on the back of the product.
▼▲
SOURCE
A
When connecting with a D-Sub signal input cable.
• Select RGB PC : 15-pin D-Sub analog signal.
B
When connecting with a
HDMI to DVI
• Select HDMI/DVI :
•
How to connect to two computers.
Note
Connect the signal cables (
Press the INPUT button on the remote control to select the computer to use.
•
Directly connect to a grounded power outlet on the wall or a power bar with a ground wire.
SET
AUTO/SET
HDMI to DVI
signal input cable.
Digital signal.
HDMI to DVI
and D-Sub) to each computer.
8 8
Rear side of the product.
Power button
Input
AV
Component
RGB PC
HDMI/DVI
▲▼
Input
AV
Component
RGB PC
HDMI/DVI
▲▼