Using The Video And Audio Input Jacks - Philips MAGNAVOX TP3675C99 Manual

Using the Video and Audio Input Jacks

L Connecting video equipment for playback of video material.
• When the television is connected to video equipment as shown below, the material being played
back on the video equipment can be seen on the television screen.
Connecting video device equipped with video output terminal.
CONNECTIONS
VIDEO EQUIPMENT
Camcorder
• The S-VIDEO INPUT terminals (IN-1) are used to obtain a higher quality image
by importing image signal separated into color and brightness signals.
• The S-VIDEO INPUT terminal is for image signal. Audio signal is to be
connected to the IN 1 AUDIO terminals (left and right).
VCR
L To watch video material playback.
• Press the Remote's INPUT to select VIDEO INPUT mode to which the video equipment you want to
playback is connected.
• The external VIDEO INPUT mode will change as follows each
time the INPUT is pressed.
• INPUT mode can be selected by pressing either the CH UP ( 8 ) on the TV remote control when the
TV is set to the highest channel stored in memory, or by pressing the CH DOWN ( 9 ) when it is set to
the lowest channel.
NOTE:
• When connecting video or audio equipment to the television, be sure that the power is turned off in
order to prevent damage to either the television or the equipment being connected.
• The S-VIDEO terminal has priority over a VIDEO terminal (IN-1). When you want to watch pictures
from video equipment connected to a VIDEO terminal, unplug the equipment connected to the
corresponding S-VIDEO terminal.
34
32-40 TP3675C
TV Game
VCR
To S-VIDEO OUTPUT (When
your video equipment has an
S-VIDEO output terminal)
To VIDEO OUTPUT
To AUDIO OUTPUT (R)
To AUDIO OUTPUT (L)
34
(Front connection
terminals of TV)
To VIDEO
VIDEO L AUDIO
OUTPUT
To AUDIO OUTPUT (L)
To AUDIO OUTPUT (R)
(Rear connection
terminals of TV)
To VIDEO
OUTPUT
To AUDIO OUTPUT (R)
To AUDIO OUTPUT (L)
(Rear connection
terminals of TV)
(MONO)
6/9/00, 9:37 AM
R