Selecting The Pip Signal Source - Philips 34PW862H99 Directions For Use Manual

T
he picture for the PIP window can come
through either the ANT/CABLE or any of
the external Audio/Video connections at the
rear of the TV. PIP SOURCE simply tells the
TV which one of these sources it is to show in
the PIP window.
Turn the TV and VCR (or other
1
device hooked to the external A/V con-
nections) ON.
Press the PIP ON/OFF button on the
2
remote control. The PIP window
should appear in the upper right-hand
portion of the screen.
Press the AV button on the remote
3
control to toggle among the different
external connections.
The PIP SOURCE may come from the follow-
ing:
AV1, AV2, AV3, S-VIDEO, CVI: for picture
signal coming from the external audio/video
jacks on the TV. (You must have an external
device hooked up at these locations.)
ANTENNA/CABLE: for a picture signal
coming from the ANT/CABLE input on the
back of the TV.
PIP – S
ELECTING THE
S S
IGNAL OURCE
MAIN SCREEN PICTURE PIP PICTURE
24
3
49
AV 1
AV 2
AV 3
NOTE: The PIP source picture can come from the
ANT/CABLE input, the AUDIO/VIDEO AV1, the
AUDIO/VIDEO AV2, the AUDIO/VIDEO AV3, or
the S-VIDEO input jacks located at the rear and side
of the TV.
5
VCR
(OR SIMILAR DEVICE)
2