Setting The Tv Clock Using The Time Control - Philips 34PW862H99 Directions For Use Manual

S
ETTING THE
Y
our television comes with an on-screen
clock. During normal operation, the clock
appears on the screen when the STATUS/EXIT
button is pressed or if the TIMER DISPLAY
control is turned ON.
1
Press the MENU button on the
remote control to show the onscreen
menu.
2
Press the CURSOR DOWN button
twice to highlight FEATURES.
3
Press the CURSOR RIGHT button and
the menu will shift to the left. TIMER will
be highlighted.
4
With TIMER selected, press the CUR-
SOR RIGHT button again to shift the
display left and highlight the TIME con-
trol.
5
Press the CURSOR RIGHT button
again to highlight the time indicator area.
6
Press the CURSOR LEFT or CURSOR
RIGHT button to select the position or
digit you wish to enter.
7
Press the CURSOR UP or CURSOR
DOWN button to select the digits for the
time. Or press the NUMBERED but-
tons to enter the correct time.
8
Press the CURSOR RIGHT button to
move to the AM or PM position.
9
Press the CURSOR UP or DOWN
button to set AM or PM.
10
Press the STATUS/EXIT button to
remove the menu from the screen.
NOTE: The TIMER Controls can also be
accessed by pressing the CLOCK button
on the remote control. See lower diagram
on this page.
H
ELPFUL
Remember, be sure to press 0 first and then
the hour number for single-digit entries.
The TV's clock settings may be lost when the
TV is unplugged (or when AC power to the set
is interrupted).
TV C
LOCK
H
INT
U T
SING THE
PICTURE TIMER
SOUND ACTIVE CTRL
FEATURES AutoLock
INSTALL PIP
CLOSED CAP
7
9
6
10
2
7
9
19
C
IMER ONTROL
FEATURES
TIMER
ACTIVE CTRL
AutoLock
PIP
CLOSED CAP
3
4
FEATURES
FEATURES
TIMER
TIME
5
START TIME
STOP TIME
6
CHANNEL
ACTIVATE
8
FEATURES
FEATURES
TIMER
1
TIME
START TIME
STOP TIME
CHANNEL
ACTIVATE
7
FEATURES
TIMER
TIME
START TIME
STOP TIME
CHANNEL
ACTIVATE
FEATURES
TIMER
TIME
START TIME
STOP TIME
CHANNEL
ACTIVATE
TIME
START TIME
STOP TIME
CHANNEL
ACTIVATE
_ _:_ _ AM
10:_ _ AM
10:30 AM
_ _:_ _ AM