When Using The Lan - LG M2901S Owner's Manual

Connecting to External Devices
1
Turn on power by pressing the power button on the product.
2
Turn on the PC.
To change input source
Press the SOURCE button on the remote control to select the input signal.
Or, press the SOURCE button on the bottom of the product.
HDMI signal

When using the LAN

Connect the LAN cable as shown in the below figure .
A
When connecting with a PC.
RJ45
RJ45
Product
Connect the LAN cable and install the eZ-Net Manager program on the CD-ROM.
For more information about the program, please refer to eZ-Net Guide in the enclosed
CD-ROM.
D-sub signal
B
When connecting with a Network.
RJ45
Product
PC
8 8
Power button
RJ45
Network