Philips 42PFL74 6M Series User Manual page 15

Mute or unmute the TV volume

Press to mute the TV, or

Press again to restore the volume.
Adjust headphone volume
> [Setup] > [TV settings] >
1. Press
[Sound].
2. Select [Headphones volume], then press
OK.
Switch TV channels

Press on the remote control.

Press CH +/- on the TV.

Press the Numeric buttons to enter a
channel number.
Manage channel lists
You can view all channels, or only a list of
your favourite channels. Press
access the channel list.
Create a list of your favourite channels
1. Press FIND.
2. Select the channel to mark as a favourite
OPTIONS.
and press
3. Select [Mark as favourite] and press OK.
The selected channel is marked with a star.
To deselect a channel, select [Unmark as
favourite], and then press OK.
FIND to
Select a channels list
1. In the channel list, press
2. Select [Select list] > [Favourites] to
display channels in the favourite list; or [All]
to display all channels.
3. Press OK to confirm.
View only analogue or digital TV channels
You can filter the channel list to access only
analogue or digital channels.
1. In the channel list, press
2. Select [Select list] > [Analogue] or
[Digital], then press OK.
Depending on your selection, only analogue
or digital channels are available.
Listen to digital radio
If digital radio channels are available, they are
installed automatically when you install the
TV channels.
1. While you watch TV, press
channel list is displayed.
OPTIONS.
2. Press
3. Select [Select list] > [Radio], then press
OK.
4. Select a radio channel, then press OK.
View programme guide
The programme guide displays information
about digital TV channels, for example:

Channel schedules

Synopsis of programmes
Note: TV programme guides are available in
certain countries only.
Set programme guide
Before you use the programme guide, check
the following settings:
1. Press .
2. Select [Setup] > [TV settings] >
[Preferences] > [Programme guide].
3. Select [From the broadcaster] or [From
network], then press OK.
Access the TV programme guide
1. Press .
2. Select [Programme guide], then press
OK.
Note: If you are viewing the programme
guide for the first time, follow the onscreen
instructions when asked to update the guide.
OPTIONS.
OPTIONS.
FIND. The
EN 15