▶
Restore On AC Power Loss
Ths tem specfies whether your system wll reboot after a power falure or nterrupt
occurs. Settngs are:
[Off]
Always leaves the computer n the power off state.
[On]
Always leaves the computer n the power on state.
[Last State]
Restore the system to the status before power falure or nterrupt
occurred.
▶
Wake Up Event Setup
Press <Enter> and the followng sub-menu appears.
▶
Wake up Event By
Settng to [BIOS] actvates the followng fields, and use the followng fields to set the
wake up events. Settng to [OS], the wake up events wll be defined by OS.
▶
Resume From S3 By USB Devce
The tem allows the actvty of the USB devce to wake up the system from S3 (Sus-
pend to RAM) sleep state.
▶
Resume From S3 By PS/2 Keyboard / Mouse
These tems determne whether the system wll be awakened from what power sav-
ng modes when nput sgnal of the PS/2 keyboard/ mouse s detected.
▶
Resume By PCI Devce (PME#)
When set to [Enabled], the feature allows your system to be awakened from the
power savng modes through any event on PME (Power Management Event).
▶
Resume By PCI-E Devce
When set to [Enabled], the feature allows your system to be awakened from the
power savng modes through any event on PCIE devce.
▶
Resume By RTC Alarm
The field s used to enable or dsable the feature of bootng up the system on a
scheduled tme/date.
▶
Date/Tme (HH:MM:SS)
If Resume By RTC Alarm s set to [Enabled], the system wll automatcally resume
(boot up) on a specfic date/hour/mnute/second specfied n these fields (usng the
<+> and <-> to select the date & tme settngs). Avalable settngs for each tem
are:
[Date]
[Tme (HH:MM:SS)]
01 ~ 31, Every Day
00 ~ 23 : 00 ~ 59 : 00 ~ 59
MS-7635
MS-7635
3-13