Table of Contents
Advertisement
How to install cable management
Cable management
I. Ceiling Mount Scenario
1
Loosen the screw before removing the cable management cover from
projector. (Illustration #1)
2
Carefully slide the clasp with your finger. (Illustration #2)
3
Pull out the cable management. (Illustration #3)
4
Plug in power cord and other cables you need.
5
If you need to install Acer Dongle
(WirlessHD-Kit/WirelessAndroid-Kit/WirelessCAST), follow the below steps:
(A) Install dongle rubber.
(B) Connect dongle to HDMI extension cable port.
(C) Fasten both side of dongle rubber to the specific position of cable
management cover.
(D) Connect to HDMI 1/MHL port on projector.
6
Assembly the cable management cover firmly to projector, and tighten the
screw. (Illustration #3,2,1)
A A
3
2 2
B B
1
C C
35
Advertisement
Table of Contents
