Page 2
roduct Features Washer doesn't operate while the lid is open. If the lid is open during the wash, rinse or spin cycles, the operation stops for safety. Fuzzy logic control ● A built-in load sensor automatically detects the laundry load and a microprocessor optimizes washing conditions such as ideal water level and washing time.
Page 3
ontents READ THIS MANUAL Inside you will find many helpful hints on how to use and maintain your washer properly. Just a little preventive care on your part can save you a great deal of time and money over the life of your washer. You will find many answers to common problems in the Troubleshooting section.
afety Information WARNING! Read and follow this safety information carefully. For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, personal injury, or loss of life. Save these instructions.
Page 6
unction Information Our machine provides various washing methods which suits various conditions and types of laundry. Different types of laundry washing Fuzzy(Normal) Wash (refer to page14) Use this Program for everyday washing e.g. sheets, towels, T-shirts. Jean Wash Use this Program for heavily soiled durable garments e.g. overalls, jeans. Thick and heavy clothes or those which are excessively dirty like jeans or working uniforms can be washed.
Page 7
Use nylon nets for long, delicate items. For laundry with long strings or long length , a net will prevent tangling during washing. Fasten zippers, hook, and strings to make sure that these items don't snag on other clothes. Nylon net is not supplied by LG.
Page 8
se of Water, Detergent, Bleach and Softener Using Water Amount of Water Level • This machine detects the quantity of laundry automatically, then sets the water level and proper amount of detergent. • When you select a wash program, the water level and amount of detergent (to be used) will be shown on the control panel.
Using Detergent How much detergent When you select a wash program the water level and the amount of detergent (to be used) will be shown on the control panel. The amount of a cup in the diagram is about 40g for concentrated detergent.
Page 10
se of Water, Detergent, Bleach and Softener Using Fabric Softener • Dilute fabric softener with water. Undiluted fabric softener may result in spots that look like oil Softener dispenser ( stains. • Measure and add the recommended amount of fabric softener into the compartment marked with this symbol( Follow manufacturer’s direction.
pecial Guide for Stain Removal WARNING ■ Do not use or mix liquid chlorine bleach with other household chemicals such as toilet cleaners, rust removers, acid or products containing ammonia. These mixtures can produce dangerous fumes which can cause serious injury or death. ■...
Program button AUTO OFF (Power) button • Use to turn the power on or off. • Use for selecting wash program. • Push again and power goes on or off • This button allows you to select 4 • The power goes off automatically about different programs for different kinds of 10 seconds after the wash is finished.
Page 14
Child Lock ashing Programs WATER PRO- TEMP. CESS Child Lock WATER WATER PRO- PRO- Washing PRO- PRO- TEMP. LEVEL GRAM GRAM CESS Programs the detergent laundry Fuzzy Washing (Normal Wash) WATER PRO- DELAY LEVEL START GRAM START Used for normal loads, this mode PAUSE automatically selects the most Add the appropriate...
leaning and Maintenance When there is a fear of freezing • Close the water taps and remove the Water Supply Hose. • Remove the water which remains in the water supply. • Lower the drain hose and drain the water in the bowl and the drain hose by spinning. If frozen •...
PRO- CESS PRO- GRAM START Close the lid Finish Caution & Note PAUSE If water is already in the tub, or putting wet laundry into the tub before starting will increase the water level. The pulsator rotates for 8 Water will be supplied When the wash With lightweight bulky loads, water level can seconds to detect the...
Page 17
elay Start (Reservation) Wash Delay Start (Reservation) Wash is used to delay the finishing time of the operation. The hours to be delayed can be set by the user accordingly. The time on the display is the finishing time , not the start time. Press the POWER button to turn power on.
Page 18
ption Washing When you only need the Wash, Wash/Rinse, Rinse, Rinse/Spin or Spin cycle, this can be set manually as follows. Press the AUTO OFF (Power) button to turn power on. Wash , Wash+Rinse , Rinse , Rinse+Spin , Spin only options Child Lock Press the PROCESS button until above Option Washing WATER...
ther Useful Functions Child Lock Function If you want to lock all the keys to prevent settings from being changed by a child, you can use the child lock option. Child Lock How to Lock WATER PRO- TEMP. CESS Press the POWER button. Turn Power on.
Page 21
onnecting Water Supply Hose Before connecting the Water Supply Hose to the water tap, check the hose type and then choose the correct instruction here under. Note that the Water Supply Hose supplied may vary from country to country, Make sure to connect the blue inlet hose to the cold water tap, and the orange inlet hose to the hot water tap.
Page 22
Normal Type (Normal tap without thread & one touch type inlet hose.) Separate Middle connector from Water Supply Hose Separate Middle connector from the Water Middle Fixed Sticker connector Supply Hose by pulling the Pressing Rod and the Pressing Handle Pressing Handle that is attached to the Water Pressing Rod Supply Hose.
Page 23
onnecting Water Supply Hose Screw Type Attach the water supply hose to the tap. Push the water supply hose up so that the rubber Water packing within the hose can adhere completely to the tap. Rubber Packing Water Supply Hose Connect the water supply hose to the tap.
onnecting Drain Hose Before connecting D rain H ose, check your D rain H ose model and choose the correct instructions. Before connecting Ensure that the hose clip is set as indicated here. Clip Connect the Elbow H ose Push the elbow hose toward the body of the washing machine.
Page 25
rounding Method Earth wire should be connected. If the earth wire is not connected, there is possible a danger of electric shock caused by the current leakage . Grounding Method with Ground insert space Terminal If the AC current outlet has a ground terminal, then separate grounding is not required.
Push the lip shown below. with water. of the filter until a pop sound is heard. Note ¥ If the lint filter is torn or damaged, purchase a new one from LG service center.
Page 27
leaning and Maintenance When there is a fear of freezing • Close the water taps and remove the Water Supply Hose. • Remove the water which remains in the water supply. • Lower the drain hose and drain the water in the bowl and the drain hose by spinning. If frozen •...
Page 28
ommon washing problems Many washing problems involve poor soil & stain removal, residues of lint and scum, and fabric damage. For satisfactory washing results, follow these instructions. WASH PROBLEM Problems Solutions & Preventive Measures Possible Causes Poor soil • Use correct amount of detergent for load size, amount of •...
Page 29
Is the laundry evenly balanced? Spin Failure Is the washing machine placed on a flat surface? Door(Lid) Open Is the lid closed? Ask for help at the LG Electronic branch Internal sensing of the Service Center failure Power failure Overflow failure...
Page 30
erms of Warranty What Is Not Covered: • Service trips to your home to teach you how to use the product. • If the product is connected to any voltage other than that shown on the rating plate. • If the fault is caused by accident, neglect, misuse or Act of God. •...
Need help?
Do you have a question about the WF-A791TC and is the answer not in the manual?
Questions and answers