Philips 86BDL4150D/00 User Manual page 59

6.2.6. Configuration2 menu
  
 
 
 
 
 


 
 
 
 
 
OSD turn off
Set the period of time the OSD (on-screen display) menu stays on the
screen.
The options are: {0 ~ 120} seconds.
OSD H-position
Adjust the horizontal position of the OSD menu.
OSD V-position
Adjust the vertical position of the OSD menu.
Information OSD
Set the period of time the information OSD is displayed on the upper
right corner of the screen. The information OSD will display when input
signal is changed.
The information OSD will remain on the screen with {Off} selection.
The options are: {Off, 1 ~ 60} seconds.
Logo
Enable or disable to show the
display.
OSD rotation
Rotate the OSD Menu.
The options are:
• {Landscape} (Default)
• {Portrait}
Monitor ID
Set the ID number for controlling the display via the RS232C
connection. Each display must have a unique ID number when multiple
sets of this display are connected. Monitor ID number range is between
1 to 255.
The option are: {Monitor group} / {Tiling matrix} / {Auto ID}
Monitor Id
Monitor Id
Monitor group
Tiling matrix
Auto ID
• {Monitor group}
The options are: {1-255}. The default setting is 1.
• {Tiling matrix}



 





 
logo when you turn on the
1
1
1
End
Tiling matrix number range is between 1 to 15. 1 is default setting.
The {Auto ID} setup function enables setting up {Monitor ID} of
connected machine according to {Tiling matrix} settings.
Example: Tiling matrix sets as 4
1 2
5 6
9 10
13 14
• {Auto ID}
The option are: {Start} / {End}. The default is {End}.
• Switch to Start option to set up IDs of machines backward
from current one.
• Once the setup is completed, the option exits to End
automatically.
• To use this function, serial connect all machines with RS-232
cable and set their Control ports to RS-232, too.
Heat status
This function allows you to check the thermal status of the display at
any time.
Monitor information
Shows information about your display, including model number, serial
number, operating hours and software version.
Monitor information
Model name
Serial NO.
Operation hours
SW Version
DP Version
The option are: {DP 1.1} / {DP 1.2} / {DP 1.2 multi}. The default is {DP
1.1}.
Human sensor
Set the display to turn on backlight if it does sensor human and turn off
backlight after an amount of time specified
The options are: {Off, 10 ~ 60} minutes.
HDMI edid
The option are: {HDMI 1.4} / {HDMI 2.0}. The default is {HDMI 1.4}.
NOTE: HDMI 2.0 option is to support HDMI 2.0 equipment use.
Image rotation
Set the picture of main Window to rotate 270 degrees.
The options are: {Off} (default) / {On}.
Window selection
Select the window for adjusting setting. The selected window will be
highlight green border.
The options are: {Main}(Default), {Sub 1}, {Sub 2} , {Sub 3} .
47
86BDL4150D
3 4
7 8
11 12
15 16
XXBDLXXXX
N/A
0
FB01.XX