Removing And Fitting Filter Silencer Or Air Suction Branch - ABB HT611169 Operation Manual

Operation Manual / TPL65-A32 / -A33 / -A36 + TPL69-A32 / -A33
8 Disassembly and assembly / 8.3 Removing and fitting filter silencer
or air suction branch
8.3 Removing and fitting filter silencer or air
Removing the air suction
branch
Installing the air suction
branch
© Copyright 2020 . All rights reserved.
suction branch
Disconnect all air lines in accordance with the engine builder's instruc-
u
tions.
Dismantle the insulation where necessary.
u
Pass a lifting gear around the air suction branch. It is permissible to
u
pass the lifting gear through holes possibly provided in the ribs to im-
prove stability.
Unscrew the nuts (72027) and remove them together with the wash-
u
ers (72018).
Remove the air suction branch and set it down to one side.
u
Fit the air suction branch in reverse order.
u
HZTL2498_EN Rev.F December 2020