Getting Started; Installing Filters - Philips AC6710 User Manual

Table of Contents

3 Getting started

Remove all packaging of the filters

before using the appliance. Unpack

them and place them into the

appliance described as follows:

Note

• There is one set of filters on

each side of the appliance.

Each side is equipped with

one pre-filter and two air

purification filters.

• Make sure that you place the

air purification filters in the

appliance first and then the

pre-filter.

• Make sure that the side with the

tag is pointing towards you.

Remove all packaging materials

of the air purification filters.

Pull the top part of the side

panel to remove it from the

appliance.

Press the two clips down and

pull the pre-filter towards you.

Put the unpacked air purification

filters into the appliance.

Note

• Put the NanoProtect HEPA

filter Series 3 (FY6172) in the

appliance first, and then the

NanoProtect Active Carbon

filter (FY6171).

Table of Contents

Table of Contents