Canon PIXMA G6050 Online Manual page 298

If you select Network name(SSID) and press the OK button, you can check the updated
identifier (SSID).
Change password
• Manual setup
1. Select Manual setup and then press the OK button.
2. Enter new password and then hold down the OK button.
The password must be 10 characters long.
3. Select whether to decide your entries and then press the OK button.
• Auto update
1. Select Auto update and then press the OK button.
2. Select Yes and then press the OK button.
3. Select Done and then press the OK button.
If you select Security protocol instead of Done, you can check the updated password.
Confirm request
To display the confirmation screen when a Wi-Fi Direct compatible device is connecting to the
printer, select Yes and press the OK button.
Important
• To prevent an unauthorized access, we recommend you should select the setting to display
the confirmation screen.
Note
• If you change the Wireless Direct setting of the printer, also change the wireless router setting of the
device.
298