Smart Control - Controlling Your Oven Remotely - Samsung NX58K7850SG/AA User Manual

Gas oven

Smart Control - Controlling your oven remotely

How to connect the oven
1. Download and open the SmartThings app on your smart device.
2. Follow the app's on-screen instructions to connect your range.
3. Once the process is complete, the connected
displays and the app confirms you are connected.
If the connection icon does not turn on, follow the instruction in the app to
4.
reconnect.
To control the oven remotely
1. Press Smart Control. appears in the display. The oven can now be controlled
remotely using a connected remote device.
Select the oven icon in the SmartThings app to open the Oven Control app.
2.
When the app is connected to the oven, you can perform the following
functions through the application:
Oven remote control using the SmartThings app
Oven/ Cooktop • Check the status of the oven
Monitoring • Monitor the on/off status of each cooktop burner.
Oven Remote Control • Set or adjust oven settings remotely.
• Turn the oven off remotely.
My Cooking • Once cooking starts, change the set cooking time or
temperature remotely.
Error Check • Automatically recognize errors.
• If is not shown in the display, you are still able to monitor the oven and
cooktop status and turn the oven off.
38 English
WI-FI On/Off
If you activate the WI-FI Off mode, any mobile devices cannot connect to the
range.
icon located on your range
•
•
•
•
•
•
•
1.
03
02
01
2.
3.
NOTES
Opening the oven door or pressing Smart Control will delete
display and prevent most of the remote functions from operating.
When oven cooking is finished or cancelled,
For safety reasons, you cannot turn on the gas oven remotely.
For safety reasons, you must specify the cooking time to enable remote
control.
The oven continues operating even if the Wi-Fi connection is lost.
Smart Control will not work properly if the Wi-Fi connection is unstable.
See the SmartThings app manual for detailed information.
Press the Broil pad and 9 on the
number pad simultaneously for 3
seconds.
Press 0 on the number pad to select Off
or On.
Press the START/SET pad to save the
changes.
from the
is removed from the display.