Connections (Notifications); Antenna Connection; Satellite Dish Connection; Ci Module Connection - LG MT77 Series Owner's Manual

Connections (notifications)

Connect various external devices to the TV and switch input modes
to select an external device. For more information about an external
device's connection, refer to the manual supplied with each device.
Available external devices are: HD receivers, DVD players, VCRs, audio
systems, USB storage devices, PC, camcorders or cameras, gaming
devices, and other external devices.
NOTE
The external device connection may differ from the model.
y
Connect external devices to the TV regardless of the order of
y
the TV port.
If you record a TV programme on a DVD recorder or VCR, make
y
sure to connect the TV signal input cable to the TV through a
DVD recorder or VCR. For more information of recording, refer
to the manual provided with the connected device.
Refer to the external equipment's manual for operating
y
instructions.
If you connect a gaming device to the TV, use the cable
y
supplied with the gaming device.
In PC mode, there may be noise associated with the resolution,
y
vertical pattern, contrast or brightness. If noise is present,
change the PC output to another resolution, change the refresh
rate to another rate or adjust the brightness and contrast on
the PICTURE menu until the picture is clear.
In PC mode, some resolution settings may not work properly
y
depending on the graphics card.

Antenna connection

Connect the TV to a wall antenna socket with an RF cable (75 Ω).
Use a signal splitter to use more than 2 TVs.
y
If the image quality is poor, install a signal amplifier properly
y
to improve the image quality.
If the image quality is poor with an antenna connected, try to
y
realign the antenna in the correct direction.
An antenna cable and converter are not supplied.
y
Supported DTV Audio: MPEG, Dolby Digital, Dolby Digital Plus,
y
HE-AAC

Satellite dish connection

(Only MT57V, MT77V, MT47V, MT47U)
Connect the TV to a satellite dish to a satellite socket with a satellite
RF cable (75 Ω).

CI module connection

(Depending on model)
View the encrypted (pay) services in digital TV mode.
Check if the CI module is inserted into the PCMCIA card slot in
y
the right direction. If the module is not inserted properly, this
can cause damage to the TV and the PCMCIA card slot.
If the TV does not display any video and audio when CI+ CAM
y
is connected, please contact to the Terrestrial/Cable/Satellite
Service Operator.

Euro scart connection

Transmits the video and audio signals from an external device to the
TV set. Connect the external device and the TV set with the euro scart
cable.
Output
Type
Current
input mode
Digital TV
Analogue TV
Component, AV, HDMI, RGB
1 TV Out : Outputs Analogue TV or Digital TV signals.
NOTE
Any Euro scart cable used must be signal shielded.
y

Other connections

Connect your TV to external devices. For the best picture and audio
quality, connect the external device and the TV with the HDMI cable.
Some separate cable is not provided.
USB port supports 0.5 A electric current. If you need more
y
electric current in case of HDD, use the separate power adaptor.

Connecting to a PC

Your TV supports the Plug & Play* feature and has the built-in speakers
with Virtual Surround that reproduces sound clearly with a rich bass.
* Plug & Play: The function when a PC recognizes a connected device
that users connect to a PC and turn on, without device configuration
or user intervention.
NOTE
If you want to use HDMI-PC mode, you must set the Input
y
Label to PC mode.
The OSD (On Screen Display) is displayed on the screen as
y
shown below.
» When turning the product on in HDMI input.
» When switching to HDMI input.
Is the input connected to your PC?
Yes
Do not show message again
If you select "Yes" the size and image quality are optimised for
y
your PC.
If you select "No" the size and image quality are optimised for
y
the AV device (DVD player, set-top box).
If you select "Do not show message again" this message
y
does not appear until the TV is reset. You can change the set
value in SETTINGS INPUT Input Label.
The values set for HDMI1/HDMI2 are saved independently.
y
(Only MT57*, MT77*)
AV1
(TV Out )
1
Digital TV
Analogue TV
No
7