LG 65UH5E-B.AEU Manual page 111

64
42. Fail Over Mode (Command: m i)
Selects a sound mode.
Transmission
[m][i][ ][Set ID][ ][Data][Cr]
Data 00: Off
01: Auto
02: User Setting
Acknowledgment
[i][ ][Set ID][ ][OK/NG][Data][x]
43. Fail Over Input Select (Command: m j)
Selects an input source for fail over. (This feature is only
available when Fail Over is set to Custom.)
Transmission
[m][j][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][ ][Data4]
... [ ][DataN][Cr]
Data 1-N (Input priority 1-N)
60: RGB
70: DVI-D
90: HDMI1
91: HDMI2
92: OPS/HDMI3/DVI-D
95: OPS/DVI-D
96: HDMI3/DVI-D
97: HDMI3/HDMI2/DVI-D
98: OPS
C0: DISPLAYPORT
Acknowledgment
[j][ ][SetID][ ][OK/NG][Data1][Data2][Data3][Data4]
... [DataN][x]
* Some input signals may not be available for all models.
* The data number (N) may vary depending on the model. (The
data number depends on the number of supported input
signals.)
* This feature operates as the last input, and supports data in
DTV format.
44. Remote Control Key Lock (Command: t p)
Configures the settings of the product's remote control key.
Transmission
[t][p][ ][Set ID][ ][Data][Cr]
Data 00: Unlocks all keys
01: Locks all keys except Power key
02: Locks all keys
Acknowledgment
[p][ ][Set ID][ ][OK/NG][Data][x]
* When the monitor is turned off, the power key works even in
the locks on all of the keys (02) mode.
45. Local Key Operation Lock
Configures the local key operation settings of the product.
Transmission
[t][o][ ][Set ID][ ][Data][Cr]
Data 00: Unlocks all keys
01: Locks all keys except Power key
02: Locks all keys
Acknowledgment
[o][ ][Set ID][ ][OK/NG][Data][x]
* When the monitor is turned off, the power key works even in
the locks on all of the keys (02) mode.
* This feature may not be available for all models.
(Command: t o)