Setting Up The Tv; Attaching The Stand - LG 65UB930T Owner's Manual

Setting up the TV

You can mount your TV to a wall or attach
the stand if you wish to place the TV on an
entertainment center or other furniture.

Attaching the Stand

If you are not mounting the TV to a wall, use the
following instructions to attach the stand.
CAUTION
When attaching the stand to the TV
y
set, place the screen facing down on a
cushioned table or flat surface to protect
the screen from scratches.
When attaching the stand to the TV set,
y
do not remove the protective packaging
and place the screen facing down on a
table or flat surface. (For UC970T series)
Make sure that the screws are fastened
y
tightly. (If they are not fastened securely
enough, the TV may tilt forward after
being installed.)
Do not tighten the screws with too much
y
force; otherwise they may be damaged
and come loose later.
NOTE
Remove the stand before installing the TV
y
on a wall mount by performing the stand
attachment in reverse.
Remove the protective film from the stand
y
base and then attach the stand body to
the stand base. (For UC970T series)
ASSEMBLING AND PREPARING
(For 49/55/60UB850T, 65UB930T,
1
65UB950T)
Stand Body (R)
Stand Base
2
(For 49/55/60UB850T)
1
Attach the stand to the TV using the upper
1
mounting hole on the back of the TV.
Attach the stand to the TV using the lower
2
connection on the back of the TV.
17
Stand Body (L)
4 EA
M4 x L20
2