Controlling The Multiple Product; Connecting The Cable; Rs-232C Configurations; Communication Parameter - LG 47LT55A Owner's Manual

76

CONTROLLING THE MULTIPLE PRODUCT

CONTROLLING THE MULTIPLE PRODUCT
Use this method to connect several products to a single PC. You can control several products at a
y
time by connecting them to a single PC.
In the Option menu, Set ID must be between 1 and 99 without being duplicated.
y

Connecting the Cable

Connect the RS-232C cable as shown in the picture.
The RS-232C protocol is used for communication between the PC and product. You can turn the
y
product on/off, select an input source or adjust the OSD menu from your PC.
PC
RS-232C Cable (not included)

RS-232C Configurations

7-Wire Configurations (Standard RS-232C cable)
PC
D-Sub 9
(Female)

Communication Parameter

Baud Rate: 9600 buad Rate (UART)
y
Data Length: 8 bit
y
Parity Bit: None
y
Stop Bit: 1bit
y
Flow Control : None
y
Communication Code : ASCII code
y
Use a crossed (reverse) cable
y
Monitor 1 Monitor 2
Set
D-Sub 9
(Female)
Monitor 3 Monitor 4
3-Wire Configurations (Not Standard)
PC Set
D-Sub 9 D-Sub 9
(Female) (Female)