Speaker Setup - LG HT306SF Owner's Manual

20 System Setting
AUDIO

5.1 Speaker Setup

Make the following settings for the built-in 5.1
channel surrounds decoder.
1. Press SETUP.
2. Use WS to select AUDIO menu and then press
D.
3. Use WS to select [5.1 Speaker setup] menu
and then press D.
4. Press ENTER
The [5.1 Speaker setup] appears.
3
5. Use AD to select the desired speaker.
6. Adjust options using WSAD buttons.
7. Press RETURN to confirm your selection. Return
to the previous menu.
HT306SF-D0_BGBRLL_ENG_3819.indd 20
[Speaker]
Select a speaker that you want to adjust.
,
Note
Certain speaker settings are prohibited by the
Dolby Digital licensing agreement.
[Size]
Since the speaker settings are fixed, you cannot
change the settings.
[Volume]
Press AD to adjust the output level of the
selected speaker.
[Distance]
After you connected speakers to your unit,
set the Distance between the speakers and
your listening point if the distance of Center
or Rear speakers is bigger than the distance
of Front speakers. This allows the sound from
each speaker to reach the listener at the same
time. Press AD to adjust the Distance of the
selected speaker. This distance is equivalent to
a difference of the distance between Center or
Rear speaker and Front speakers.
[Test]
Press AD to test the signals of each speaker.
Adjust the volume to match the volume of test
signals memorized in the system.
2011-01-31 10:07:04