Language; Display - LG HT306SF Owner's Manual

LANGUAGE

Menu Language
Select a language for the Setup menu and then on
screen display.
Disc Audio / Disc Subtitle / Disc
Menu
Select the language you prefer for the audio track
(disc audio), subtitles, and the disc menu.
[Original]
Refers to the original language in which the disc
was recorded.
[Other]
To select another language, press numeric
buttons and then ENTER to enter the
corresponding 4-digit number according to the
language code list on the page 34. If you enter
the wrong language code, press CLEAR.
[Off (for Disc Subtitle)]
Turn off Subtitle.
HT306SF-D0_BGBRLL_ENG_3819.indd 19

DISPLAY

TV Aspect
Select which screen aspect to use based on the
shape of your TV screen.
[4:3]
Select when a standard 4:3 TV is connected.
[16:9]
Select when a 16:9 wide TV is connected.
Display Mode
The Display Mode setting works only when the TV
Aspect mode is set to 4:3.
[Letterbox]
Displays a wide picture with bands on the upper
and lower portions of the screen.
[Panscan]
Automatically displays the wide picture on the
entire screen and cuts off the portions that do
not fit. (If the disc/file is not compatible with Pan
Scan, the picture is displayed at Letterbox ratio.)
TV Output Select
Select an option according to the TV connection
type.
[RGB]
When your TV is connected with the SCART
jack.
[YP P ]
B R
When your TV is connected with the
COMPONENT/ PROGRESSIVE SCAN jacks on the
unit.
,
Note
If you change TV Output Select to RGB from
YPbPr on the setup menu especially when
connecting the unit in the way of component
video connection, the screen turns black.
In that case, connect the video cable to
MONITOR jack and select YPbPr on the setup
menu again.
System Setting 19
2011-01-31 10:07:04
3