Advertisement
4.10 SWITCHING ON THE APPLIANCE AND SELECTING THE WASHING PROGRAMME
To switch on the appliance and select the programme, proceed as follows:
1.
Turn the programmes knob in either direction. This switches on the washing machine.
2.
Select the washing programme. The time left to the end of the programme on the display. The symbols on the
display light up to identify the information shown.
3.
The default spin speed values are shown. The initial settings can be modified using the button underneath the
sequence of spin speeds. And temperatures
4.
If spin speed
is set, there will be no spin cycle and the appliance will stop with the tank full. If this value
is set the appliance does not perform the final spin and the washing programme ends with water in the tank.
Spin Speed selection
Temperatures selection
EN
Time to end
12
Advertisement
