Preparation; Checklist; Prepare To Install The Oven - Samsung NQ70M6650DG Installation Manual

Preparation

Checklist

Use this checklist to verify that you have completed each step of the installation
process. This can help you avoid mistakes.
1. Before installing the oven, be sure to verify the cabinet dimensions are correct
for your unit and the required electrical connections are present.
2. Refer to the installation manual for content regarding Safety, Cabinet
Dimensions, Removing Packaging, Electrical Installation, Testing the
Installation and Customer Service.
3. To lift up the oven, hang the install handle onto the side hook of the unit.
4. Move the oven unit into place in front of the cabinet opening, leaving the
bottom packaging on the unit to avoid damaging flooring.
5. Team lift the unit directly into the cabinet cutout taking care not to pinch
fingers or scratch hands or arms. Make sure the electrical conduit reaches to
the connection point properly.
6. Slide the unit all the way into place, making sure to route the electrical conduit
correctly.
7. Fasten the oven unit to the cabinetry opening with screws supplied (using
Philips screwdriver).
8. Consult the complete installation instructions and follow the remainder of the
procedures listed, including performing an operation test.
9. All product literature and accessories are supplied (may be wrapped or boxed)
with the oven.
10. INSTALLER - Leave the literature pack and the accessories with the customer.
4 English
Install_NQ70M6650D_DE68-04454A-00_EN.indd 4

Prepare to install the oven

Phillips Screwdriver
Prepare to install the oven
8 screws (M4 L16)
8 Wood Screws For Mounting (6 screws
needed for installation and 2 extra's)
Materials needed
Junction Box
3 / " Conduit Connector
4
Drill
30" (76.2 cm)
Metal Bottom Trim
Wire Nuts
1/9/2017 6:13:30 PM