3 Get started
Caution
•
Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in
sequence.
Placement
You can place the unit on a flat surface or
mount the unit on a wall.
Mount on a wall
See the wall mounting instructions included in
the package.
Prepare FM antenna
For better reception, fully extend and adjust the
position of the FM antenna.
Note
•
To prevent interference, position the antenna as far as
possible from TV, VCR, or other radiation source.
Prepare the remote control
Caution
•
Risk of explosion! Keep batteries away from heat,
sunshine or fire. Never discard batteries in fire.
1
Open the battery compartment.
2
Insert the supplied batteries with correct
polarity (+/-) as indicated.
3
Close the battery compartment.
a
b
Connect power
Caution
•
Risk of product damage! Make sure that the power
supply voltage corresponds to the voltage printed on
the back or the underside of the unit.
•
Risk of electric shock! When you unplug the AC power
adapter, always pull the plug from the socket. Never
pull the cord.
•
Before connecting the AC adapter, make sure that you
have completed all other connections.
Note
•
The type plate is located at the back of the main unit.
c
EN
7