Samsung DVG52M775 Series User Manual page 32

Operations
02 Dry Level
03 Temp.
04 Time
05 Digital Graphic
Display
06 Eco Dry
32 English
DV7750M_DC68-03170Y-05_EN.indd 32
Press to adjust the dryness in the Sensor Dry and Steam Cycles.
The corresponding indicator turns on.
• Larger or bulkier loads may require Very Dry or More Dry for
complete dryness.
• Less Dry is best suited for lightweight fabrics or for leaving
some moisture in the clothing at the end of the cycle.
• Damp Dry is designed to partially dry items. Use for items that
lay flat or hang to dry.
NOTE
This option is not available with STEAM SANITIZE, and ACTIVE
WEAR.
Press to change the temperature of the current cycle.
• High: For sturdy cottons or those labeled Tumble Dry.
• Medium: For permanent press, synthetics, lightweight cottons,
or items labeled Tumble Dry Medium.
• Med Low: For heat lower than Medium. Use to dry synthetic or
washable knit fabrics.
• Low: For heat sensitive items labeled Tumble Dry Low or
Tumble Dry Warm.
• Extra Low: Provides the lowest heated drying temperature
possible.
Press to adjust the drying time for the Manual Dry cycles. This
is not available with the Sensor Dry cycles because the dryer
determines the drying time by sensing the current moisture level
of the load.
Displays all cycle information, including the cycle time,
information code, and operating status.
This function is available with NORMAL and TIME DRY.
With the Eco Dry activated, drying takes a longer time but the
power consumption is reduced.
The drying time can be extended by up to 3 times depending on
the temperature and load. The Eco Dry function is enabled by
default.
2019-06-03 5:18:35