Samsung WF45T6000A Series User Manual page 19

Clearance requirement
This clearance requirement is applicable for washers only.
NOTE
• For dryer's clearance requirement, see the dryer's user manual.
• If the washer and dryer have different clearance requirements, use the one with the
larger value.
Alcove or closet installations
Minimum clearance for stable operation:
Sides
1 in. (25 mm)
If both the washer and a dryer are installed in the same location, the front of the alcove
or closet must have two unobstructed air openings for a combined minimum total area of
72 in. (465 cm ).
2 2
Undercounter installation
A
B
Pedestal installation
Untitled-31 19
Top Rear
1 in. (25 mm) 5 in. (127 mm)
C
Front
1 in. (25 mm)
A 39.6 in. (1006 mm)
B 1 in. (25 mm)
C 1 in. (25 mm)
A 5 in. (127 mm)
B 6 in. (152 mm)
52.0 in. (1320 mm)
C
English 19
2020-03-02 PM 3:19:35