Assign Backup Jobs To The Backup Button; Edit A Backup Job; Recover Backed-Up Data - NETGEAR READYNAS NV+ RND4425v1 Software Manual

Assign Backup Jobs to the Backup Button

You can assign a backup job to the Backup button on the front of your ReadyNAS system.
This makes performing a backup as simple as pressing the Backup button.

To assign a back up job to the Backup button:
1. From the FrontView main menu, select Backup > Backup Jobs.
2. In the Backup Button Setup pane, use the drop-down lists to determine which backup jobs
to perform when the backup button is pressed.
3. Click the Apply button.
Your settings are saved
When you press the Backup button, the jobs are performed in the order listed.

Edit a Backup Job

After you create a backup job, you can edit it later.

To edit a backup job:
1. From the FrontView main menu, select Backup > Backup Jobs.
2. In the Backup Schedule pane, click the job number button for the backup job.
3. Edit the job the same way that you would create one.
For more information, see
4. Click the Apply button.
Your settings are saved.

Recover Backed-up Data

You can create a recovery backup job in much the same way you originally backed up the
data: Create a new backup job that is the "recovery" job, and use the backup job's source as
the recovery job's destination and the backup job's destination as the recovery job's source.
You also need to set a few options correctly to avoid accidentally erasing the recovered data.

To recover backed-up data:
1. From the FrontView main menu, select Backup > Add a New Backup Job.
2. In the Select backup source pane, choose the original backup job's destination.
Ensure that the settings in the recovery job's source pane are exactly the same as the
settings in the backup job's destination pane.
For more information, see
Select a Remote Location
ReadyNAS Duo, NV+, and 1100
Create a Backup Job
Select a Location on Your ReadyNAS System
on page 82.
Back Up Files
85
on page 81.
on page 81 and