NETGEAR READYNAS NV+ RND4425v1 Software Manual page 82

• USB device. Each USB port on your ReadyNAS system is listed in the source and
destination drop-down lists. Choose a port to back up to or from the device attached to
that port. You can set up a backup even though no device is attached to the port. If no
device is attached when the backup is triggered, the backup fails.
If you want to disconnect the device when the backup completes, select Unmount USB
drive after backup.
• Private home share. Each user's private share is listed in the source and destination
menus by name.
• All home shares. Available in only the source drop-down list, this option backs up all the
private home shares, each to its own folder on the destination.
• Time Machine. Choose this option to backup your Time Machine repository on your
ReadyNAS system to an external drive.
• Folder. To back up to or from only one folder, click Browse and select the folder.
Select a Remote Location
Select a location that is not on the ReadyNAS system as the source or destination for the
backup. You have the following options:
• Windows or NAS server using archive bits. Select the Remote: Windows/NAS
(Archive Bit) menu option to back up a Windows or NAS server. It is available only in the
Source drop-down list. When performing an incremental backup, the ReadyNAS system
uses a file's archive bit to determine whether to back up the file.
• In the Host field, enter the IP address or host name of the remote system.
• In the Path field, enter the path name for the remote system.
• In the Login and Password fields, enter the user name and password for the remote
system.
• Windows or NAS server using timestamps. Select the Remote: Windows/NAS
(Timestamp) menu option to back up to or from a Windows or NAS server. It is available
in both the source and destination drop-down lists. When this location is the source and
an incremental backup is being performed, the ReadyNAS system uses timestamps to
determine which files to back up.
• In the Host field, enter the IP address or host name of the remote system.
• In the Path field, enter the path name for the remote system.
• In the Login and Password fields, enter the user name and password for the remote
system.
• HTTP server. Select the Remote: Website menu option to back up to or from an HTTP
server. It is available in both the source and destination drop-down lists.
• In the Host field, enter the IP address or host name of the remote system.
• In the Path field, enter the path name for the remote system.
• In the Login and Password fields, enter the user name and password for the remote
system.
ReadyNAS Duo, NV+, and 1100
Back Up Files
82