LG 50PA4500 Owner's Manual page 79

Setting
Country Selects a desired country.
y y
y y
y y
y y
y y
y y
y y
Disabled Assist- Option
ance (In Digital
Hard of Hearing
Mode only)
Audio Description
ISM Method A frozen or still picture displayed on the screen for prolonged periods will result in a ghost image
remaining even when you change the image. Avoid allowing a fixed image to remain on the
screen for prolonged periods.
Option
Normal
Orbiter
Colour Wash
Data Service This function allow users to choose between MHEG (Digital Teletext) and Teletext if both exist at
(only in Ireland.) the same time.
Factory Reset This function initializes all settings.
y y
Set ID Adds an ID to the connected devices
NOTE
If you do not finish the set-up Installation Guide by pressing
the OSD (On Screen Display) the installation menu will continuously appear until the set
up is completed whenever the TV is switched on.
If you select the wrong local country, teletext may not appear correctly on the screen
and some problems may occur during teletext operation.
The CI (Common Interface) function may not be applied based on country broadcasting
circumstances.
DTV mode control buttons may not function based on country broadcasting
circumstances.
In country that Digital broadcasting regulation isn't fixed, some DTV function may not
work depending on digital broadcasting circumstances.
The Country Setting "UK" should only be activated in UK.
If the country setting is set to "--", European terrestrial digital standard broadcasting
programmes are available, but some DTV functions may not work properly.
This function is for the hearing impaired.
This function is for the blind, and provides explanatory audio describ-
ing the current situation in a TV programme in addition to the basic
audio.
When Audio Description On is selected, basic audio and Audio
Description are provided only for those programmes that have Audio
Description included.
Volume
Beep
Sets it if image sticking is never a problem.
Orbiter may help prevent ghost images. However, it is best not to al-
low any fixed image to remain
on the screen. To avoid a permanent image on the screen, the screen
will move every 2 minutes.
The colour block with the screen moved a little and the white pat-
tern are alternately displayed. It is difficult to sense the afterimage
occurred while the temporary afterimage is removed and the colour
pattern is operating.
NOTE
In Lock System "On", if you forget your password, press '0', '3', '2', '5' on the remote
control handset.
CUSTOMIZING SETTINGS
Description
Changes the Audio Description volume
Beeps when a programme with Audio Description
information is selected
79
or if you time out on