■
Analogue
Set Analogue channel manually after
Set
Sound System
●
Normally set
Colour System
– SC1: PAL B, G, H / SECAM B, G
– SC2: PAL I
– SC3: PAL D, K / SECAM D, K
– F: SECAM L, L'
1. Select the channel position with
2. Select the channel with
3. Set
Manual
Tuning.
4. Select
Store
and press
Use
Fine Tuning
●
programme (affected by weather conditions, etc.).
If a VCR is connected only with the RF cable, select channel position 0.
●
■
DVB-via-IP (DVB-S)
Please consult the received satellite broadcasting companies for the
●
setting.
1. Select
Transponder Frequency
FEC
/
Service ID
2. Select
Start scan
Auto
and
Colour
System, and then perform this function.
to Auto.
Numeric
Channel Up /
OK
to set.
to make small adjustments to the tuning of an individual
/
Symbol Rate
and set with
Cursor buttons
and press
OK
to search.
- 124 -
Setup.
buttons.
Down.
/
Polarisation
or
Numeric
/
Modulation
/
buttons.