Storage - RIDGID RT1400M0 Owner's Manual

ACCESSORY & HOSE STORAGE
Accessory Storage
1. The Extension Wands and other
Accessories can be stored by placing
them over the Posts on the Four Caster
Feet.
2. To remove, twist and pull up on the
Extension Wand or Accessory.
3. Snap additional Accessories onto the
Accessory Caddy.
Accessory
Caddy
Accessories
SP7081 1400M0 01/19.indd 31
Accessories
Caster Feet Posts (4)
Caster Feet (4)
Cord Storage
To store the Cord, wrap it around the
Powerhead Carry Handle / Cord Wrap
beneath the two Tabs. Secure the Cord
using the Cord Clip on the Plug.
Powerhead Carry
Handle/Cord Wrap
Cord Clip
Cord & Plug
Hose Storage
The Professional Locking Hose may be
stored around the Powerhead Assembly by
tucking it between the Motor Housing and
Hose Clips.
CAUTION:
Do not operate vacuum while the
hose is still wrapped around the
powerhead assembly in the storage
position.
WARNING:
Do not put any object into ventilation
openings. Do not vacuum with any
ventilation openings blocked; keep
free of dust, lint, hair or anything that
may reduce air flow.
Powerhead
Assembly
Hose Storage Clips (2)
31
Professional
Locking Hose
1/31/19 4:42 PM