LG 32LV550T Owner's Manual page 8

8
ASSEMBLING AND PREPARING
CAUTION
Do not use any pirated items to ensure the safety and product life span.
y y
Any damages or injuries by using pirated items are not covered by the warranty.
y y
NOTE
The items supplied with your product may vary depending on the model.
y y
Product specifications or contents of this manual may be changed without prior notice due to
y y
upgrade of product functions.
How to use the ferrite core(Only Plasma TV)
1 Use the ferrite core to reduce the electromagnetic interference in the PC audio cable.
Wind the PC audio cable on the ferrite core thrice. Place the ferrite core close to the TV.
[to an External device]
2 Use the ferrite core to reduce the electromagnetic interference in the power cable.
Wind the power cable on the ferrite core once. Place the ferrite core close to the TV.
[to a wall plug]
3 Use the ferrite core to reduce the electromagnetic interference in the power cable.
Wind the power cable on the ferrite core once. Place the ferrite core close to the TV and a wall plug.
[to a wall plug]
4 Use the ferrite core to reduce the electromagnetic interference in the LAN cable. Wind the
LAN cable once on the small ferrite core and thrice on the big ferrite core. Place the
ferrite core close to the TV.
[to the TV]
- If there is one ferrite core, follow as shown in Figure 1.
- If there are two ferrite cores, follow as shown in Figures 1 and 2.
- If there are three ferrite cores, follow as shown in Figures 1 and 3.
- If there are four ferrite cores, follow as shown in Figures 1, 2 and 4(1).
- If there are five ferrite cores, follow as shown in Figures 1, 3 and 4(1).
- If there are six ferrite cores, follow as shown in Figures 1, 3 and 4(2).
For an optimal connection, HDMI cables and USB de-
y y
vices should have bezels less than 10 mm thick and
18 mm width.(Except for 42/50PT25**, 50/60PV25**,
42/50PT35**, 50PV35**, 50/60PZ25**, 42/50PW45**,
50/60PZ55**, 22/26/32LK33**, 32/37/42LK43**,
32/42/47LK53**, 47LK95**, 42/50PT45**)
[Figure 1]
[Figure 2]
[Figure 3]
(2)
(1)
A B
[Figure 4]
10 mm(+ / - 5 mm)
[to the TV]
[to the TV]
[to an External
device]
B
(Gray)
[Cross Section of
Ferrite Core]
(Black)
[Cross Section of
Ferrite Core]
[to the TV]
(Black)
[Cross Section of
Ferrite Core]
A (Gray) B (Gray)
[Cross Section of
Ferrite Core]
*A 10 mm
*B 18 mm