Making Connections; Connecting To An Antenna Or Cable - LG 39LN549C Quick Reference Manual

Hide thumbs Also See for 39LN549C:
Table of Contents

Advertisement

Available languages

Available languages

18

MAkiNG cONNEcTiONS

MAKING CONNECTIONS
You can connect various external devices to the TV. Supported external devices are: HD receivers, DVD players, VCRs,
audio systems, USB storage devices, PC, gaming devices, and other external devices. For more information on external
device's connection, refer to the manual provided with each device.
NOTE
If you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal input cable to the
y
y
TV through a DVD recorder or VCR. For more information on recording, refer to the manual provided with the
connected device.
The external device connections shown may differ slightly from illustrations in this manual.
y
y
Connect external devices to the TV regardless of the order of the TV port.
y
y
If you connect a gaming device to the TV, use the cable supplied with the gaming device.
y
y
Refer to the external equipment's manual for operating instructions.
y
y
It is recommended to use an HDMI connection for the best image quality.
y
y
Depending on the graphics card, DOS mode may not work if a HDMI to DVI Cable is in use.
y
y
In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or brightness. If noise
y
y
is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the
brightness and contrast on the PICTURE menu until the picture is clear.
The synchronization input form for Horizontal and Vertical frequencies is separate.
y
y
Depending on the graphics card, some resolution settings may not allow the image to be positioned on the
y
y
screen properly.

connecting to an antenna or cable

Connect an antenna, cable, or cable box to watch TV while referring to the following. The illustrations may differ from
the actual items and a RF cable is optional.
VHF Antenna
uHF Antenna
ANTENNA
IN
coaxial (75Ω)
(*Not Provided)
cAuTiON
Make sure not to bend the copper wire of the RF
y
y
cable.
copper wire
CABLE
IN
Complete all connections between devices, and
y
y
then connect the power cord to the power outlet
to prevent damage to your TV.
Antenna
or
Terminal
ANTENNA
IN
CABLE
IN
coaxial (75Ω)
(*Not Provided)
NOTE
To improve the picture quality in a poor signal
y
y
area, please purchase a signal amplifier and install
properly.
Use a signal splitter to use more than 2 TVs.
y
y
If the antenna is not installed properly, contact your
y
y
dealer for assistance.
DTV Audio Supported Codec: MPEG, Dolby Digital
y
y
Wall Jack

Advertisement

Chapters

Table of Contents
loading

Table of Contents