Dubbing Usb To Usb - LG MCS1306F Owner's Manual

Dubbing USB to USB

You can do dubbing a various sound source in
USB1 to USB2 on USB function.
1. Connect a USB device including desired sound
fi les to USB1.
2. Connect an USB device to USB2.
3. Press REC. TO USB 2 on the unit or X REC on
the remote control.
4. To stop recording, press I on the unit or
Z ENTER on the remote control.
Pausing recording
During recording, press REC. TO USB2 on the
unit or X REC on the remote control to pause
recording. Press it again to restart recording. (Only
Radio/ AUX/ Portable)
,
Note
 You can check the recording percentage
rate for the USB record on the display
window during the recording. (MP3/ WMA
CD Only)
 During recording MP3/ WMA, there is no
sound.
 When you stop recording during playback,
the fi le that has been recorded at that time
will be stored. (AUDIO CD Only)
 Do not remove the USB device or turn
off the unit during USB recording. If not,
an incomplete fi le may be made and not
deleted on PC.
 If USB recording does not work, the
message like "NO USB", "ERROR", "USB FULL"
or "NO REC" is displayed on the display
window.
 Multi card reader device or External HDD
can not be used for USB recording.
 A fi le is recorded by about 512 Mbyte when
you record for a long term.
 When you stop recording during playback,
the fi le will not be stored.
 You may not store more than 999 fi les.
 It'll be stored as follows.
AUDIO CD MP3/ WMA
* : TUNER, AUX, Portable and the like.
The making of unauthorized copies of copy-
protected material, including computer
programs, fi les, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal off ense.
This equipment should not be used for such
purposes.
Be responsible
Respect copyrights
Operating 25
3
The other
source*