Change Settings; General (Sleep, Standby; Picture; Sound - Philips DVP2800/12 User Manual

3 Change settings

This section helps you change the settings of
this player.
1
2
3
Note
•
You cannot change a menu option that is grayed out.
•
To access [Preference], stop the disc play.
•
To return to the previous menu, press . To exit the
menu, press .

General (sleep, standby...)

1
Press .
2
Select [Setup] > [General] to access the
general setup options.
[Disc Lock]: Lock or unlock a disc for
•
play. To play a locked disc, you need
to input your password: press
to enter a digit, and press
change a digit position. The default
password is "136900".
[OSD Language]: Select a language for
•
on-screen menu.
[Sleep Timer]: Set a period of time for
•
this player to switch automatically to
standby mode from play.
[Auto Standby]: Enable or disable
•
auto standby. If enabled, this player
switches automatically to standby after
Disc Setup
Unlock
Disc Lock
General
OSD Language English
Sleep Timer Off
Video
Auto Standby
On
DivX(R) VOD Code Registration
Audio
Preference
/
•

Picture

1
Press .
2
Select [Setup] > [Video] to access the
video setup options.
•
•
•

Sound

1
Press .
2
Select [Setup] > [Audio] to access the
audio setup options.
•
•
to
15 minutes of inactivity (for example,
in pause or stop mode).
[DivX(R) VOD Code]: Display
the DivX registration code and
®
deregistration code.
[TV System]: Select a TV system
that matches your TV. By default, this
setting matches the common TVs in
your country.
[Aspect ratio]: Select a picture display
format to fit the TV screen.
[Picture Setting]: Select a predefined
color setting, or customize a setting.
[Analogue Output]: Select an audio
format for sound output when this
player is connected through the
AUDIO OUT L/R connectors.
[Digital Audio]: Select an audio format
for sound output when this player is
connected through the COAXIAL
connector.
[Digital Output] - Select a type
•
of digital output: [Off] - Disable
digital output; [All] - Support
multi-channel audio formats;
[PCM Only] - Downmix to two-
channel audio signal.
[LPCM Output] - Select a LPCM
•
(Linear Pulse Code Modulation)
output sampling rate. The higher
the sampling rate, the better the
EN
11